Chat with us, powered by LiveChat Skip to main content
VD20070

PSA Peugeot Citroen 2011 and Up Steering Lock Emulator Simulator With Lock Sound No Programming Required

Item Code: VD20070

Product Categories: Emulators

Manufacturer: MK3

  • Available in Stock
  • New Arrivals
Buy More Pay Less
FROM 2 to 4$ 44.65
FROM 5 to 9$ 43.55
FROM 10 to 19$ 41.45
FROM 20 to 49$ 39.35
From 50 & More $ 37.25
Product Information
  • $45.00
  • More than 10 available

  • Add to Wishlist
  • Manufacturer: MK3
  • Status: New

PSA Peugeot Citroen 2011 and Up Steering Lock Emulator Overview:

Device Emulates PSA ESCL Unit, compatible with PSA Cars With Electronic Steering Column Lock (ESCL), FT-CAN, 2011 And Up

PSA Peugeot Citroen Emulator is Plug & Play , No Programming Required.

  • ELV Is A Self-occurring Mechanical Failure In The Steering Column Lock.
  • The Occurrence Of The Fault Does Not Depend On Any Fault.
  • In Case Of Malfunction, Even If There Is No Problem In The Vehicle Key, The Working Key Will Not Start The Vehicle Because The ELV Steering Column Lock Will Not Be Activated.
  • In This Case, A New ELV Steering Column Lock Must Be Installed In The Vehicle And Programmed Into The Vehicle.

Steering lock problem is one of the most frequent Problems in many cars including the Peugeot Citroen Starting System. and when the steering lock is faulty, the car will start even if the customer has a 100% working key for it until you order a new steering lock for it from Peugeot Citroen agencies. BUT instead of spending hundreds of dollar for order a new OEM steering lock, we offer you this economic solution; the PSA Peugeot Citroen Emulator which needs NO PROGRAMMING, just plug and start!

This emulator replaces the faulty Peugeot Citroen ESCL Units, it is compatible with PSA Cars With Electronic Steering Column Lock (ESCL), FT-CAN, 2011 And Up

PSA Peugeot Citroen Steering Lock Emulator Installtion on Car :

1. Turn off the ignition.
2. Plug the ESL connector into the our emulator.
3. The SCL works only when it receives open and close signal.
4. Push the start button and the green led lights. If the red led blinks, there is an error that has to be erased by any diagnostic tool.

 

 

Similar Items